The problem
You need analysis you can act on by the next shift.
Factory teams face the same procedure performance problems daily: SOP throughput drops with no step-level visibility, and two operators running the same procedure produce different results. Even with modern time-study tools, finding it means hours of setup, scrubbing footage, and interpreting numbers that never tell you which step or what to do.
TurboProc Scope does the whole analysis for you, automatically. No setup, no scrubbing, no exporting, no interpreting. Just your camera and the procedure you want to improve.
Where it fits
Built for the work small and mid-size discrete manufacturers run on the floor every day.
Packaging lines
Boxing, sealing, labeling, line-side handoffs.
Manual assembly
Cycle-time variation, rework, inconsistent step execution.
Equipment setup
Changeover drag, tool/staging delays, sequence inefficiency.
High-value discrete
Where small execution gains compound into outsized output.
What you get
Step-by-step analysis, formatted for the floor and the boardroom.
Real-time step analysis
Every procedure step measured for timing and compliance as it runs, with the steps carrying the throughput loss ranked first.
Step-level problem location
The bottleneck located down to the specific step, with the AI surfacing potential sources based on what that step is meant to accomplish, and prioritized improvements ready to deploy on the next shift.
ROI reporting
Findings reported in throughput, labor efficiency, and cost, drawn from your own session data.
Step-indexed video evidence
Ready to use as training, SOP updates, and before/after proof. No editing required.
How it works
Three steps. Real-time feedback.
Run it yourself, with your camera, and get results as the procedure runs.
Pick the procedure to improve
Packaging, manual assembly, equipment setup, any high-value discrete operation. No vendor scheduling required.
Capture it with your camera
Point your camera at the workstation. TurboProc Scope captures the procedure as it runs and segments every step automatically while the shift is in progress.
Get prioritized fixes in real time
The AI measures each step's timing and compliance, ranks the steps carrying the throughput loss, and returns prioritized improvements with engineering rationale as the procedure runs.
What the supervisor sees
Step-indexed, in real time.
During a session, TurboProc Scope segments the procedure automatically, every step, every operator, every cycle, and the AI measures each step's timing and compliance against the target as the procedure runs.
Live capture · steps progress as the operator works
Built for the floor
Your video never leaves your hands.
TurboProc Scope keeps the captured video on your device. Only sampled still frames are sent for analysis and discarded right after, and no video is stored in the cloud. No account, no sign-in, and no personal data from the app. It measures the work, not the worker.
ROI in the metrics leadership already uses
Throughput. Labor efficiency. Cost.
More output from the lines you already have
Every step measured against its target duration. Output recovered without adding labor.
Fewer delays, less rework, stronger labor value
The AI surfaces which steps are dragging cycle time, so supervisors can act, not interpret.
Acted on the same day, not the same quarter
A full analysis that used to take a specialist and a desktop now takes one session. Recoverable margin compounds session over session.
Built for your team
Expert-grade analysis, in your team's hands.
Engineers
Skip the setup, scrubbing, and interpretation, go straight to fixing. The AI does the analysis.
Supervisors
Prioritized fixes ready for the next shift, with evidence operators can see for themselves.
Plant leadership
Recommendations drawn from your own operating data, not generic Lean theory.
Ops executives
Faster ROI in the metrics already on your weekly review.
About TurboProc
Silicon Valley AI, built for the factory floor.
TurboProc is a Silicon Valley AI technology startup with deep expertise in edge AI, manufacturing automation, and video analytics. We exist for one purpose: putting real-time expert AI optimization in the hands of every line supervisor and manufacturing engineer.
Edge AI
Real-time visual perception built so your captured video stays on the device at the line.
Manufacturing automation
Production AI deployed into live manufacturing, built around the workflows supervisors and engineers actually run.
Video analytics
Camera and imaging expertise at the silicon level, from ISP architecture through AI-powered video analytics.
Not ready to install? Start with the free procedure audit.
The Packaging Procedure Audit is a short field guide: 10 warning signs your SOPs are quietly losing throughput, and what to check on the floor. No install required.
Common questions
Straight answers before you install.
What is TurboProc Scope?
TurboProc Scope is an AI procedure-optimization tool for manufacturers. You capture a procedure with your camera, and the AI measures the timing and compliance of every step as the work runs, locates the bottleneck down to the specific step, and returns prioritized fixes you can deploy on the next shift. It runs on the phone already in your pocket. What AI procedure optimization is covers the category in full.
Is this a time study?
No. A time study is a manual industrial-engineering method: a trained observer times work elements with a stopwatch or reviews video afterwards, then analyses the samples by hand. TurboProc Scope automates the measurement, runs while the work runs, and returns prioritized fixes rather than only timings. The classic method is still valid, and time-study software alternatives is honest about when it is the better call.
What does it cost, and do you need a subscription to try it?
You do not need a subscription to start. TurboProc Scope begins with a free trial: a one-time welcome allowance of AI Optimization Reports at no charge, with no payment details. A subscription covers ongoing use, at $99 per month for 20 reports or $399 per month for unlimited. Full detail on the pricing page.
Does the captured video leave your device?
No. The captured video and the per-step analysis stay on your device. Only sampled still frames are sent for analysis and are discarded right after, and no video is stored in the cloud. There is no account and no sign-in, and the app sends no personal data. It measures the work, not the worker. The privacy policy has the full breakdown.
Do you need IT approval, sensors, or line integration?
None of the three. TurboProc Scope installs from the App Store on your own device and needs nothing from your plant network: no integration, no server access, no sensors, no procurement process. An engineer or supervisor can validate it on a real procedure and produce the reports that justify a subscription before involving purchasing or IT.
What kind of work is it built for?
Packaging lines, manual assembly, equipment setup and changeover, and other high-value discrete work where small execution gains compound into real output. It is aimed at small and mid-size discrete manufacturers, and it is used by shift supervisors, continuous-improvement managers, manufacturing and industrial engineers, and plant leadership.
How fast do you get results?
The analysis runs while the procedure runs, so the findings are there the same day rather than after a review cycle. That is the whole point of the tagline: the fixes are meant to be in front of a supervisor in time to change what happens on the next shift. We do not publish a percentage improvement figure, because we do not have verified numbers to publish, and inventing one would make everything else here worth less.
Learn the ground first
Guides for finding where the time is going.
Written for supervisors and CI managers, with competitors included where they belong and no invented numbers anywhere.
What is AI procedure optimization?
The category definition, how the workflow runs, and how it differs from time studies and digital work instructions.
How to find the bottleneck
Locate the constraint at line level, then narrow it to the specific step that is losing the time.
Best tools for shift throughput
Five tool categories, matched to the kind of throughput loss each one actually finds.
Time-study software alternatives
Modern ways to find lost cycle time, and when the classic manual study is still right.
Versus digital work instructions
One standardizes the method, the other measures execution. When you need which.
Throughput glossary
Cycle time against takt time, OEE and its components, WIP, micro-stops, and the rest, in plain language.
Run your first session today.
TurboProc Scope is available on the App Store and starts with a free trial; a subscription is only for ongoing use. Get expert AI findings the same day. Have your team running prioritized fixes on the next shift.
Download on the App Store →